GRIFFIN G6

GRIFFIN G6 case is a complete example of a modern and attractive gaming case. Powerful cooling by two 200mm fans in front of the case, ARGB lighting with remote control, and synchronizing with the motherboard (MB Sync), with USB 3.1 Type-C Gen 2 (10 GPS), hard tempered glass side cover to display entire interior space and ultra-strong skeleton with modern design and least limitation in installing high-level components are some of the capabilities that make choosing Griffin G6 extremely tempting!

  • A modern, strong skeleton with a simple, stylish, specific, and attractive design at the same time
  • Ability to install graphics card vertically 
  • Extended interior space with the ability to install large professional motherboards with the size of E-ATX(12”×13”)
  • With 9 channel ARGB lightning hub, equipped with remote control and with synchronizing ability (MB Sync)
  • Equipped with 4mm thick tempered glass side cover
  • Supporting different kinds of professional water cooling with 120/240/280/360mm radiators
  • Possibility of installing professional air cooling with a maximum height of 165mm
  • Possibility of installing professional graphics cards with a maximum length of 370mm
  • Benefit from 7 expansion card slots to support up to 3 graphics cards
  • Equipped with two USB 3.0 ports and a USB 3.1 Type-C Gen 2 (10 GPS) port
  • With two 200mm quiet fans in the front and a 120mm fan in the back of the case (ARGB)
  • Possibility to install up to eight 120/140/200mm fans in the front, top, power cover, and back
  • Side tempered glass with the ability to fully display interior space
  • With magnetic and cellulosic filters in all air inlet and outlet ducts
  • Equipped with a metal PSU cover of and ability to remove and move storage equipment conparment

 

When there is no limitation for your imagination
Ultra-strong skeleton, modern interior design with extended space, massive airflow through two 200mm fans in the front panel, and super attractive ARGB lighting along with other features such as including USB 3.1 Gen 2 Type-C 10Gbps port are some of the capabilities that make GRIFFIN G6 case a wise choice for professional and modern gaming systems.

 

Look more distinguished than ever!
The appearance design of the GREEN Griffin G6 case is based on the further display of high-level components equipped with RGB lighting. The smoke gray tempered glass embedded in the front panel and side cover has provided the conditions for your modern and attractive hardware to show off more than ever.

 

ARGB lighting system with dozens of attractive effects
GRIFFIN G6 case is equipped with ARGB (Addressable RGB) lightning system. In this new lightning technique, due to digital control signals and addressing capability, and distinct control of each light-emitting diode, you’ll observe far more beautiful lightning effects. In addition, the lightning controller considered for this case can be synchronized with most motherboards equipped with an ARGB 3pin (5V) connector in addition to having dozens of colors and lighting effects (with speed adjustment ability).

 

Side and front cover of tempered glass
Transparent side cover with the ability to display interior hardware of the case, has always been one of the most important and attractive features of gaming cases. Hard tempered glass with a tinted color has been considered for the GRIFFIN G6 case side and front cover. The light smoke gray color of this transparent cover, in practice, increases the color concentration of RGB lightning of this case and adds to its attractiveness more than ever.

 

Ability to install graphics card vertically
The possibility of installing graphics cards vertically in high-level cases and equipped with transparent side cover is one of the most attractive features that especially gamers are very interested in. G6 GRIFFIN case has provided this exciting capability for gamers through a special *Vertical VGA Mounting kit
* Vertical VGA Mounting kit is not a part of the case’s belongings and is sold separately.

 

 

Efficient fan/lighting controller and equipped with remote control
The ability to provide dozens of various lightning effects, speed adjustment and stopping the effects, and synchronizing fan rotation speed (PWM) and lightning effects with motherboards equipped with 3pin ARGB socket or 3pin VDG with 5V voltage is one of the most important features of this modern 9 channel controller.

 

Ultra-strong body with modern design
Steel sheet with a maximum thickness of 0.8mm along with the modern design of the GRIFFIN G6 case structure has caused us to observe an extremely strong body in this model. Also, due to the anti-slip legs, the stability of the case is maintained at different surfaces, and despite the wide and efficient interior space, there will be almost no limitations in supporting modern and high level components.

 

Entering dust is prohibited!
All air ducts in the floor (power air inlet), roof, and front of the GREEN GRIFFIN G6 case are covered with washable magnetic and cellulose filters. These filters play an important role in preventing dust from entering the case.

 

 

Extraordinary potential to support a variety of fans and water cooling
The GRIFFIN G6 case comes with two powerful 200mm fans on the front and an ultra-quiet 120mm fan on the back of the case. Also, the modern skeleton of this case is designed to be able to install a maximum of 8 fans with a size of 120/140 / 200mm and water cooling with dimensions of 120/140/240/280 / 360mm. In fact, there will be almost no limitation on installing different types of fans and water cooling in this case.

 

Extended interior space with least limitation in supporting modern components
Supporting motherboards with maximum dimensions of E-ATX (12”×13”), high-end graphics card with a maximum length of 350mm and 160mm high air cooling caused no worries about installing modern and high-end components for users in this case. In fact, optimized interior space in this 7 expansion slot mid-range case is similar to high-level, full-tower cases in many ways.
* If you install motherboards with dimensions of ("E-ATX (12" x13), the ability to manage cabling from behind the motherboard tray will be limited.

 

Efficient space in storage equipment
The ability to install up to five "2.5" and up to four "3.5" drives with the ability to customize, move and even separate the storage compartment is one of the most important features of this case. Also, the ability to separate this part in the bottom of the case, the possibility of installing ATX power supplies (power) with any dimensions are provided for this model.

 

 

Front panel equipped with modern and extremely durable ports
For the front panel of this case, the most modern combination possible for input and output ports is considered. Two USB 3.0 5Gbps ports along with a Type-C USB 3.1 Gen2 10Gbps port provide a high-speed platform for connecting to accessories and modern storage equipment. Moreover, due to the application of stainless steel and improved materials used in these ports, their lifetime and permanence have significantly increased and oxidation of the metal used in these ports is impossible even in highly humid areas.

 

Physical Specification
Model GRIFFIN G6
Case Form Factor Mid-Tower
Dimensions 482mm x 216mm x 468mm
Weight 8400 Gram
Exterior Paint Black
Interior Color Black
Material 0.8mm SPCC
Side Cover Material Tinted Tempered Glass
PSU Cover Yes
PSU Support ATX PS2 PSU
Technical Specifications
Expansion Slots 7 Qty
Motherboard Support Mini-ITX - 6.7" x 6.7" , Micro-ATX - 9.6" x 9.6" , ATX - 12" x 9.6" , E-ATX - 12" x 13" , SSI CEB - 12" x 10.5"
Maximum GPU Length 370mm
SLI / CrossFireX Support 2Way / 3Way
Maximum CPU Cooler Height 165mm
Water Cooling Support 120mm , 240mm , 360mm , 140mm , 280mm
PSU Position Botton position
Maximum PSU Length 210mm
Cable Management Yes
Combo Drive Support 5 Qty
HDD Drive Support 4 Qty
SSD Drive Support 4 Qty
Front Panel Ports 1x USB 3.1 Gen 2 (10 Gbit/s) Type-C (Max 15W) , 2x USB 3.0 (5 Gbit/s) , HD Audio
Lighting With ARGB LED Fans
Cooling
Dust Filter Two Magnetic filters in the Top and Front of the case, One filter in the power Inlet
Total Fan Count 8 Qty
Pre-Installed Fans 3 Qty
Back Fan Mount (installed) 1x 120mm
Front Fan Mount (Installed) 3x 120mm / 2x140mm / 2x200mm
Top Fan Mount 2x 120mm / 2x 140mm
Bottom Fan Mount 2x 120mm
Installed Fans Specifications
Fan Dimensions 200mm: 200mm x 200mm x 25mm | 120mm: 120mm x 120mm x 25mm
Fan Bearing Hydraulic Bearing
Max Fan RPM 120mm: 1100RPM ± 10% | 200mm: 700RPM ± 10%
Max Fan Air Flow 120mm: 56CFM | 200mm: 75CFM
Fan Voltage Range (5V-13.0V-DC (FAN) / 5V (ARGB
Max Fan Rated Current (120mm: (0.17A (FAN) + 0.22A (ARGB) | 200mm: (0.28A (FAN) + 0.35A (ARGB
Fan Lighting Yes (120mm: 7x 5050 RGB LED | 200mm: 12x 5050 RGB LED)
Warranty and After-sales Service
Warranty Period 24 Mounths
Other Features With 9-channel ARGB fan / lighting hub equipped with remote control (IR) and synchronization with motherboard (MB Sync)

GRIFFIN G6 Gallery

User manual and documentation
GREEN Product Catalog
Full GREEN Product Catalog for Q3-2020
Size : 52.1MB
Download

Yes. This case has a 9-channel ARGB lighting hub.

Lighting capability of this case is compatible with motherboards with 3Pin ARGB sockets (most modern ASUS, MSI, ASRock and GIGABYTE motherboards) with 5V digital addressable RGB.

This feature will be activated by pressing the MB Sync button on the remote control.

No, 4Pin RGB sockets have analog signal and 12V output voltage and are not compatible with the case's lighting controller. The lighting controller synchronization capability of this case is only compatible with motherboards with 3Pin ARGB socket with 5V digital or Addressable RGB.

Make sure the 2-pin LED SW connector on the front panel is connected to the LED_SW socket on the lighting controller.

Yes. To install this type of power supply, you must remove the shelf of the storage equipment screwed to the bottom tray of the case.

This feature is only compatible with the GREEN RISER CABLE kit in the GRIFFIN G6 case. Note that this kit is sold separately.

To activate this function, you must first connect the PWM connector branched from the fan controller to one of the 4Pin PWM sockets of the motherboard and then activate the FAN AUTO function by remote control. Note: Be sure to make sure that the PWM mode of the socket to which you connected the PWM connector is enabled (check the relevant settings in the motherboard's Bios).
Also, connect the hub's PWM connector only to CPU_FAN, CPU_OPT FAN or PUMP FAN sockets. Also, make sure that the Bios version and motherboard control and monitoring software are up-to-date.
*Note: The only way to use PWM control is to use a PWM fan with a 1 to 2 conversion, so that the hub controller of this fan can adjust its rotation with another fan in the form of a clone.

To deactivate the lighting, simply press and hold the LED switch on the roof panel of the case for 3 seconds.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

Similar Products

Browse similar products.

HIWA

New

GRIFFIN G3

G600-4U Rackmount

ARIA

GRIFFIN G2

PARS EVO

New

GRIFFIN G4

Oraman

Z5 SURENA

AVA

New

GRIFFIN G1

Related Products

Browse related products to this product in vary categories.

HURACAN FAN GFK120M-ARGB (Fan Kit)

GP400A-ECO Rev3.1

GP450A-ECO Rev3.1

GRIFFIN Gaming Mouse Pad

GF120-FSB

GX622S

New

GP1200B-OCDG

GK601-RGB

New

GM605 RGB

GF120-HAF

GKM505W

GP500A-ECO Rev3.1