GRIFFIN G3

Modern and high quality for special gamers!

GRIFFIN G3 green case is an affordable example of a modern case with a special gaming design for special gamers. Powerful cooling thanks to 4 120mm fans in the front and back of the case, ARGB lighting with the ability to synchronize with the motherboard (MB Sync), with two ports (USB 3.0 (5Gbps), side cover made of heated glass to fully display the interior space in Next to the graphic card holder and the ultra-strong skeleton with a modern design and the least restrictions on the installation of high-end parts, these are among the most important premium features of this mid-range gaming case.

ARGB lighting system has dozens of attractive effects

The GRIFFIN G3 case is equipped with an ARGB (Addressable RGB) lighting system. In this new lighting technique, thanks to digital control signals and the ability to address and control each light diode separately, you will see far more beautiful lighting effects. In addition, the lighting controller intended for this case, in addition to having dozens of colors and lighting effects (with the ability to adjust the speed), it is possible to synchronize (MB Sync) with most motherboards equipped with 3Pin ARGB connector. It also has 5V.

Tempered glass side cover

One of the most important attractive features of gaming cases has always been the transparent side cover with the ability to display the hardware inside the case. For the side cover of this model, tempered glass with smoked color is considered. The light smoky color of this transparent cover actually increases the concentration of the RGB lighting color of this case and adds more to its charms.

The ability to install the graphics card vertically

The ability to install the graphics card vertically in high-end cases equipped with a transparent side cover is one of the most attractive features that gamers are especially interested in. GRIFFIN G3 case has provided this exciting feature for gamers due to all the standard graphics card installation kits.

* Vertical VGA Mounting Kit is not included in this case and is sold separately.

Super strong frame with modern design

The steel sheet with a maximum thickness of 0.7mm, along with the modern design of the GRIFFIN G3 case skeleton, has caused us to see an extremely strong body in this model. Also, thanks to the non-slip bases, the stability of the case is maintained at different levels, and despite the large and optimal internal space, there will be almost no restrictions in supporting modern and high-end components.

Entry of dust is prohibited!

All the air intake ducts in the floor (power air inlet), roof and front part of GRIFFIN G3 Green case are covered with washable magnetic and mesh filters. These filters play an important role in preventing dust from entering the case.

High potential in supporting all kinds of fans and water coolers

The optimized skeleton of the GRIFIIN G3 case is designed in such a way that, like the high-end models, it has the ability to install up to 6 fans with the size of 120/140mm and water coolers with the dimensions *120/140/240/280/360mm. be In fact, there will be almost no restrictions for installing different types of fans and water coolers in this case.

* Installing a water cooler equipped with a 360mm radiator is only possible if the compartment for installing the storage equipment is separated on the bottom of the case or moved to the power side.

Fan bearings with Rifle Bearing technology

The fan core with new Rifle Bearing technology is a new and modified generation of Sleeve Bearing. In this type of cores, the bearing has spiral grooves, which ensure the pumping of the lubricating liquid to the higher parts of the shaft. In fact, fans with this technology do not have the limitations of sleeve bearing fans when installed at a horizontal angle, and despite the very low sound noise, they have a lifespan similar to that of ball bearing fans.

Spacious interior with minimal restrictions on supporting modern components

Support for motherboards with the maximum dimensions *(E-ATX (12"x13), high-end graphics cards with a maximum length of 340mm and air coolers with a height of 160mm make users have no worries about installing modern and high-end parts in this Don't have a case. In fact, the very wide and optimized internal space of this mid-range 7-slot case is similar to the high-end Full-Tower cases in some ways!

* In case of installing motherboards with dimensions ("E-ATX" (12"x13), the ability to manage cabling from the back of the motherboard tray will be limited.

Efficient space in the storage equipment department

The possibility of installing up to three 2.5" drives and up to two 3.5" drives with the ability to personalize, move and even separate the storage equipment compartment is one of the most important strengths of this case. The ability to separate this section on the bottom of the case has provided the possibility of installing water coolers equipped with 360mm radiators or power supplies with a length of more than 300mm for this model.

The front panel is equipped with modern and durable ports

There are two USB 3.0 ports, two USB 2.0 ports and HD Audio input and output for the front panel of the GRIFFIN G3 case. In addition, due to the use of stainless steel and the strengthening of the material used in these ports, their durability and life have been greatly increased, and even in areas with high air humidity, there is a possibility of oxidation of the metal used in these ports. There will be no ports. Also, due to the special switch (LED) considered in the front panel, it is also possible to change the lighting effects for the user.